19t/H Dn50 1.0MPa 25W Water Descaler Water Treatment Unit

Model NO.: CLDC Usage: Industrial, Home, Agriculture Power: 25-500W Trademark: peide Origin: China Method: Physical Treatment Water Flow: 19-1970t/H Material: Carbon Steel, 304ss or 316L Specification: ISO 9001 HS Code: 8421999000  19T/H DN50 1.0Mpa 25W Water Descaler Water Treatment Unit 


Application 

The electric descaler widely used in central air conditioning system, industry chilling system, heat exchange system, boiler system, etc.

Product structure 

It consists of main and vice part, which can be installed together or separated. Main part is a high-frequency signal generator, vice part can transfer signal to water.

Working principle

Scale resist and prevent
Based on Electromagnetic Theory, invented by Dr. Lorentz, the electric water descaler stops calcium carbonate and magnesium carbonate formation. Water absorbs electromagnetic energy, which physical structure changes and chain water molecules break into smaller single water molecule. The single water molecule covers negative and positive ion of dissolve saline, which reduces electrostatic attraction and effective collision, but increase water dipole moment and compatibility to negative and positive saline, which finally loose pipe wall scale and to remove them. 

Kill bacterial and algae 
The electromagnetic wave creates turbulence flow, which destroys cell wall's ion channel and changes cell's living ambient. Cells die as of no suitable living area. What's more, large amount of single water molecules covers dissolve oxygen, which cut microorganism oxygen demanding so that to prevent microorganism sediment formation. 

Rust resist and corrosion prevention
Oxygen molecule in water become inert oxygen as covered by singe water molecule, which cut off oxygen-demanding for mental rust. 
The electromagnetic field create "Skin-effect", which gathers negative charge inside pipeline wall. Water molecule covers positive charge, it rejects Fe ion dissolve from metal pipe. Negative charge on pipeline wall attract positive Fe ion to form Fe3O4 membrane.

Feature 

1.Make use of high-frequency electromagnetic technology in water treating, which can increase at least 30% work efficiency.
2.The technology can treat max water hardness of 700mg/L. ( in CaCO3)
3.The special alloy material can make use life time to 20years. 
4.Signal light shows electrode energy release enough or not. 
5.Extra add drain outlet, which is easy to drain scales.
Technical parameter 
1.Input power: 220V, 50HZ
2.Water hardness require: ≤700mg/L(CaCO3)
   Temperature: ≤95ºC
   Work pressure: 1.0MPa,1.6MPa
   Flow speed: ≤2.8m/s
3. Scale resist: ≥95%
    Bacterial killing: ≥95%
    Algae removing: ≥95%
    Reduce corrosion: reduce to 1/10 of origin
4. Function time: within 2 hours in after treating. Half-time is 1 hour. 

Compare 

No	Item	Made by PEIDE	Made by others company	Instruction
1	Shielding mesh	Shielding mesh makes sure electrodes work separately, without any interruption	No shied mesh	Increase efficiency 30%
2	Electrode material	Alloy material	Brass	Life time 5-7times than brass
3	Circuit board and electrode connection way	Makes use of shielding connection, it can transfer energy to electrodes fully	Connect directly, which will cause dis-connect after long using. No shielding design, which has interruption to other equipment.	Peide reduce the energy consumption to the lowest
4	In/outlet design	Add extra guide plate	No	Peide design can transfer more stable electromagnetic energy
5	Transformer material	Transformer works well even in severe ambient, (even in water) electric elements all imported	Less ability in high temperature and high humidity ambient.	Peide design can install indoor or outdoor
6	Protection setting on main part	The special temperature design can ensure main part work less than 40ºC.	Over 50ºC	Main part life time increases 3-5times.
7	Drain design	Yes	No	Peide design more completed.
8	Vice part inside treating	With phosphorization treating	No	Increase strength of magnetic field.

Model options

Model	Pipe diameter		A	B	C	D	Power	Water Flow
	inch	mm					W	T/H
CLDC-2D	2	50	500	100	280	300	25	19
CLDC-2.5D	2.5	65	500	100	280	300	25	28
CLDC-3D	3	80	500	150	330	300	50	50
CLDC-4D	4	100	500	150	330	300	50	80
CLDC-5D	5	125	600	219	340	400	70	125
CLDC-6D	6	150	680	273	350	400	70	180
CLDC-8D	8	200	800	325	470	500	80	320
CLDC-10D	10	250	850	377	530	550	120	490
CLDC-12D	12	300	920	426	560	600	210	710
CLDC-14D	14	350	970	478	560	650	250	1000
CLDC-16D	16	400	1020	530	660	700	330	1400
CLDC-18D	18	450	1090	630	730	750	410	1600
CLDC-20D	20	500	1200	720	830	800	500	1970

How to use

-Red indicator light is the power indicator light.
-Green light is working indicator light.
-Red and green light is light on, it means equipment work Well.
How to deal with breakdown
Normally inspect according to the situation of red and green indicator light.
1)Red indicator light is the power indicator light. Green light is working indicator light.
2)Red light works, green light not work, users should stop the equipment, and notice the factory or technicians to repair.
3)Green light works, red light not work, it shows equipment in normal operation, users can notice the factory to repair at the same time.

 

Contact us if you need more details on Water Descaler Systems. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Descaler for Boiler、Descaler - Water Softener Alternative. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Descaling Equipment > Others Descaling Equipment